Quick Fix to Startup Repair in Windows not Working [5 EASIEST WAYS]

Overview of Startup Repair in Windows 7 not working

Startup Repair is one among the recovery tools within the System Recovery Options menu. It are often wont to scan your computer and fix missing or damaged system files that prevent Windows from starting correctly. When Windows 7 fails to boots properly, this tool are often wont to scans your PC for issues like corrupt system files or an invalid boot file, then tries to repair the matter .

However, sometimes, once you use this tool, you'll meet Startup Repair loop or Startup Repair not working issue in Windows 7. Here not working basically has two situations: Startup Repair stuck and Startup Repair cannot repair this computer automatically.

Case 1: Startup Repair stuck
Windows 7 Startup Repair stuck can also be called Startup Repair Windows 7 loop. This error prevents you from accessing anything on your computer and presents an endless loop of loading Startup Repair.

My 2-year-old pack up my computer manually and Since then, I even have been unable to show the pc on. it's stuck in startup repair. My husband tried to try and do a system restore, but it went straight back to startup repair. Please advise!

Case 2: Startup Repair cannot repair this computer automatically
When your OS doesn't start properly, and you are trying to repair it with Startup Repair. However, the error message "Startup repair cannot repair this computer automatically" pops up and prevents the Startup Repair to fixing some problems of your PC.

Tried else up my computer this morning and was given the message: “Startup Repair cannot repair this computer automatically”. I'm running Windows 7 Professional, installed onto an important M4 SSD. Would anyone be ready to help me resolve this? Thanks tons .
                                             

Solutions to Startup repair Windows 7 not working
Startup repair stuck
This problem is perhaps caused by damaged or corrupted BCD settings or corrupted boot partition. Follow the subsequent steps to unravel this problem.

Method 1: Run chkdsk on the boot volume

The instruction chkdsk tool are often wont to check (and sometimes repair) your drives for filing system corruption.

Open prompt from System Recovery Options and sort chkdsk C: /f to see your installation for corrupted, invalid or deleted system files.

Method 2: Disable Automatic Restart

Restart your computer

Wait for your BIOS to finish POST (the screen together with your manufacturer logo and/or system information)

Quickly begin tapping F8 repeatedly, until you see the list of boot options

Choose “Disable automatic restart on system failure”

Press Enter and await your PC else .

Note: this may not fix the boot error you're experiencing in and of itself

Startup repair cannot repair this computer automatically
Sometimes, your windows got corrupted during a really unfitness that Startup repair cannot fix it, or some files got to get replaced due to some minor fault in your previously installed Windows.

Solving this problem, you would like to troubleshoot it step by step and fix the important problem.

Method 1. Run the sfc /scannow command (System File Checker) to repair filing system

1. Restart your computer.

2. Start pressing F8 repeatedly until the Startup Options screen is displayed.

3. Select Safe Mode with prompt .

4. When prompt appears, type the subsequent command: sfc /scannow /offbootdir=d:\ /offwindir=d:\windows.

5. Press Enter and restart your computer after the method is completed .

Method 2: Manually plan to rebuild the BCD

Open prompt from System Recovery Options and sort

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

Method 3: Fix Windows files manually

Open CMD from System Recovery Options then type the subsequent command:

Command 1: - C: (change the CMD path)

Command 2: - dir

Command 3: - cd\windows\system32\config

Command 4: - dir

Command 5: - MD mybackup

Command 6: - copy *.* mybackup

Command 7: - CD RegBack

Command 8: - DIR

Command 9: – copy *.* ..

Command 10: – exit

How to Fix No Input-Signal on PC/LAPTOP ?

When your business doesn't have an Information Technology department, it's getting to fall on you to remain your computers running within the event of an error .If your monitor is displaying "No input ," there is no image displayed from your PC to your monitor. There are several possible causes for this error. To fix it, you'd wish to compute which component is flawed , ranging from the cables that attach your monitor to your PC to the monitor itself or even your PC's video card.


1
Turn off your computer.

2
Unplug the cable running from your monitor to your PC and plug it back in, ensuring the connection is firm. the foremost common explanation for this error could even be a loose cable.

3
Reattach the cable running from your monitor to your PC. If the monitor remains not displaying a logo after firmly reattaching the cable, the matter could appear the hay the cable, especially if the cable has visible damage.


4
Replace your monitor with another monitor if possible. If the "No Input Signal" error still appears, the matter doesn't rest with the cables or the monitor, but in conjunction together with your PC.

5
Open your PC case and locate your video card. Remove the cardboard then replace it firmly in its slot or, if possible, insert the video card into another slot on your motherboard. A video card that's not making a firm connection won't display images to the monitor. Close your PC case and test the monitor again.

6
Replace your video card completely. Your video card may suffer from internal damage that's not allowing it to output a logo .

How to disable unnecessary program at startup ?

While you open your computer; at the start up time unnecessary program lunched so they make system slow. 

Example :- Adobe Reader, Skype, Torrent, Driver pack Updater ,Printer etc. So how to disable this types of unnecessary program ? Please follow the following steps.

1. Press Windows Key + R from keyboard. Then  Run Command box display .

 

2. Type msconfig in the rub box and Press Enter Key from keyboard or Click on Ok. Then System Configuration will Shows.  

3. Then go to the Startup Tab . Then you see startup program list. Remove ok marks from the list which you suffer from start up unwanted program.

4. Click on Apply  .
5. Click on Ok. 
6. Then Restart the system.